
"Your service department was simply the best I have ever dealt with. We felt like your top priority and I could not believe how responsive you were. The first company I have dealt with who truly understands it is a big deal for us when we aren't up and running."
Thanks again,
Mike Hunek
fabTech
Goodhue, MN

On behalf of Hydra-Power, I would like to express my appreciation to ChipBLASTER for a job well done. From the initial inquiry we made about repairing the existing ChipBLASTER unit we had back in October 2016 thru the installation of both of our new ChipBLASTER units, the service we have received has been outstanding. A special thank you to Danielle Horwath, Aaron Morris and yourself for the prompt & knowledgeable responses to my many questions. I will recommend ChipBLASTER to other CNC shops that may need High Pressure Coolant Systems.
Thank You,
Lee Johnson Tool Room Coordinator
Hydra Power Systems Inc

I have a long career with a manufacturing facility as their facilities manager. We run 2 shifts per day and machine some really difficult high strength steels with hardness up to 600 HBW. For 7 years now we have used ChipBLASTER high pressure units in our facilities. In my opinion the ChipBLASTER units are bulletproof. They have never broken down to the point that we needed a service guy. I greatly recommend that others consider ChipBLASTER.
D.M.

We machine zinc, aluminum, and chrome plated parts.
We were machining parts that created fine dust that contaminated the coolant and clogged up the filters in our CNC machines. We were seeing filter life of only four hours. We could not go through production like that.
Since we received the CentraBLAST filtering unit nine months ago we have had great results. We have not seen filters clogging up since. The maintenance on the machine tool sumps has gone way down. We no longer need to shut down to change filters.
I am very impressed with the efficiency of the CentraBLAST unit. It is maintenance free and works well. Plus it does not take up that much space on the floor.
We liked the unit performance so much that we purchased three more for our other CNC machines.
Eric LaJoie

We’ve been using ChipBLASTER products for at least ten years now.
We cut cast iron and bronze, running (4) ten-hour shifts per day.
We saw that ChipBLASTER came out with a new unit, the M30-70. We liked the fact that there are no filters. We ordered one six-months ago. We now have six of these units and we save ten minutes a day of down time associated with not having to change filters. We are also saving $320 per week not having to buy filters. We plan on purchasing three new machine tools this year and all will have the new ChipBLASTER M30-70 unit with Cyclone Filtration.
Scott W.

Randy (ChipBLASTER service technician) was great to work with. He was quick with the installs and answered our questions about the equipment.
R.R.

Tom (ChipBLASTER service technician) did a good job. He checked back multiple times to make sure things were running properly.
Jack H.

The ChipBLASTER service technician was promptly at my facility and a very hard worker! Did a good job on all three of my machines.
Randy V.

I love the filter longevity that I get with the dual filters. I have multiple ChipBLASTER units and I love them!
Chuck D.

ChipBLASTER service provides excellent support. I recently needed parts asap and they shipped them out UPS RED and I was very impressed with the service I received.
Richard H.

I’ve been using ChipBLASTER for about 15 years now. I love the faster production I get with ChipBLASTER. It does the job!
Bobby L.

We are machining Ductile Iron. Our coolant sumps are dirty with lots of sludge buildup and we were experiencing high pressure pump failures due to contamination. ChipBLASTER explained the advantage of filtering our coolant with a CentraBLAST self-filtering pump and we brought one into our facility. We were amazed at the change in the sludge accumulation in our sump. It went from 6” to 2” in one month. We can now clean our sump less frequently and our filter bags only need changed once a month instead of once a week.
Frank
Reynolds Machine Co.


|
Our companies’ owner, also my father, introduced me to your company many years ago when we got our 1st 1,000 PSI coolant unit and we haven’t stopped since. In our minds, it’s just an automatic, not even a thought anymore, whenever we buy a new machine,
CHIPBLASTER comes STANDARD….PERIOD!!
When we 1st started buying, you guys used to offer your own line of turning tools with many different pocket geometries. Now they are available from nearly every cutting tool company. We still work with you guys on custom tool modifications. These tool mods are life savers for us and your modifications in the past have probably more than tripled tool life from a tool that without you guys, isn’t possible to achieve HP coolant right at the point of contact!! Awesome job!! We want to hit that cutting edge with as much high pressure coolant as we can. I’m positive you already know and understand very very well since you actually produce the majority of all the high pressure systems I’ve ever seen and/or heard of. I have all the confidence in the world that I deal with the right people.
Scott Trout
TNT Machine Co.
Barberton, OH
|
|