When drilling many factors such as chip re-cutting, premature tooling failure and poor finishes can affect the performance of your machine, tooling, and your parts. Machining with a ChipBLASTER high-pressure coolant system can address those problems.
ChipBLASTER forces high-pressure coolant into the cutting zone, which evacuates chips out of the hole and the cut. There is no re-cutting of chips or strings of metal wrapped around the drill.
Heat is controlled in the operation. Putting high-pressure coolant at the chip/tool interface allows your tool and part to remain cool.
Because heat is controlled during the operation, your parts have fantastic finishes and no damage from heat related problems.
For More Detailed information on drilling or articles about drilling:
Drilling Test Cut Data